Thames begins refurbishment of landmark Oxfordshire water tower
Thames Water has started a £300k project to restore a landmark tower which can hold almost a million litres of drinking water.
At nearly 30 metres tall, Berinsfield Water Tower can be seen for miles around the south Oxfordshire countryside. Built in 1959, it supplied all 850 properties in the village but was taken out of service two years ago when regular inspections became too difficult due to problems accessing the tower.
As a result, the village’s water is currently piped in from further afield. But the pressure needed to do this can put a strain on where two sections of pipe meet, with the potential to cause leaks.
A water tower works by gravity, so bringing it back into action will reduce the need for water to be pumped through the network at pressure - and in turn reduce the risk of leaks.
Work is set to start this month and will include replacing the existing ladders with a safer staircase, along with improvements to the access road and security. The tower, which is as tall as 10 giraffes, is expected to be back in operation by December.
Thames Water project manager Rob Searle said: “Reducing leakage remains one of our key priorities, and bringing Berinsfield Water Tower back into service will help us achieve that. We’re currently pumping water at a higher than normal pressure but with the tower back in action we can reduce the pressure in the network and the strain on the pipes.”
Thames Water revealed in June it had hit its regulatory leakage target, having reduced overall leakage from its 20,000-mile network of pipes by 15% in one year.
It now has ambitious plans to continue modernising the region’s network by ramping-up the use of advanced digital technology and smart data to achieve a further 20% reduction in leakage by 2025, and 50% by 2050.
The company has also cut supply interruptions – where customers are off water for more than four hours – by half over the last two years and recorded some of its best water quality scores.
Thames Water operations director Steve Spencer said: “We’re determined to build on this momentum for another 20 per cent drop in leakage over the next five years, and then go much further as part of ambitious long-term plans to re-plumb London and the Thames Valley.
“We know there’s no room for complacency as we face even tougher targets, and that’s why we’re investing in our people and the best technology to keep upgrading our network.”
- Thames Water remains worst performer on leakage Thames Water continues to be "by far the worst performer" on leakage, according to the Public Accounts Committee... Read More >
- SES Water hits leakage reduction target for 21st successive year SES Water has met its leakage target for the 21st year in a row, according to its annual report, published 15 July. Read More >
- Severn Trent launch UK first fibre optic trial Severn Trent is trialling the use of fibre optic cables inside its pipes, in a bid to reduce the number of leaks and... Read More >
- How to achieve improved reliability of service Richard Broome, managing director and founder of LSBUD, talks about why a consistent service is key to customer... Read More >
- Narrowband Internet-of-Things: turning the tide on water leakages Phil Skipper, head of strategy at Vodafone Business IoT, tells us how narrowband Internet of Things is being used to... Read More >
- Southern Water's leakage reduction drive Southern Water recently worked with tech company Gutermann on the mass roll-out of NarrowBand Internet of Things leakage... Read More >
- How new tech twists on legacy processes are helping turn the tide on water leaks Victoria Edwards, chief executive of FIDO Tech, talks about leakage and how the water sector's drive for innovation is... Read More >
- How to bake a connected water network Rik Gunderson, utility client director at Software AG, tells us how to "bake" a smart water network. Read More >