Biosolids turned into bricks in Australian research project
Biosolids left over from wastewater treatment processes have been successfully used to create clay-fired bricks in a research project in Melbourne, Australia.
Around 30% of the world’s biosolids are stockpiled or sent to landfill, using up valuable land and potentially emitting greenhouse gases, creating an environmental challenge.
The team at RMIT University in Melbourne has demonstrated that fired-clay bricks incorporating biosolids could be a sustainable solution for both the wastewater treatment and construction industries.
Published this month in the journal Buildings, the research showed how making biosolids bricks only required around half the energy of conventional bricks.
As well as being cheaper to produce, the biosolids bricks also had a lower thermal conductivity, transferring less heat to potentially give buildings higher environmental performance.
The EU produces over 9 million tonnes of biosolids a year, while the United States produces about 7.1 million tonnes. In Australia, 327,000 tonnes of biosolids are produced annually.
The study found there was a significant opportunity to create a new beneficial reuse market in bricks.
About 5 million tonnes of the biosolids produced in Australia, New Zealand, the EU, US and Canada currently go to landfill or stockpiles each year. Using a minimum 15% biosolids content in 15% of bricks produced could use up this 5 million tonnes.
Lead investigator Associate Professor Abbas Mohajerani said the research sought to tackle two environmental issues – the stockpiles of biosolids and the excavation of soil required for brick production.
“More than 3 billion cubic metres of clay soil is dug up each year for the global brickmaking industry, to produce about 1.5 trillion bricks,” Mohajerani, a civil engineer in RMIT’s School of Engineering, said.
“Using biosolids in bricks could be the solution to these big environmental challenges.
“It’s a practical and sustainable proposal for recycling the biosolids currently stockpiled or going to landfill around the globe.”
The research examined the physical, chemical and mechanical properties of fired-clay bricks incorporating different proportions of biosolids, from 10 to 25%.
The biosolid-enhanced bricks passed compressive strength tests and analysis demonstrated heavy metals are largely trapped within the brick. Biosolids can have significantly different chemical characteristics, so the researchers recommend further testing before large-scale production.
The biosolids bricks are more porous than standard bricks, giving them lower thermal conductivity.
The research also showed brick firing energy demand was cut by up to 48.6% for bricks incorporating 25% biosolids. This is due to the organic content of the biosolids and could considerably reduce the carbon footprint of brick manufacturing companies.
The results of a comparative Life Cycle Assessment and an emissions study conducted as part of the research confirmed biosolids bricks offered a sustainable alternative approach to addressing the environmental impacts of biosolids management and brick manufacturing.
The research, funded by RMIT University, Melbourne Water and Australian Government Research Training Program scholarships, is published in the “Green Building Materials Special Issue” of Buildings.
- Tamesis and AMK in Deephams battle Joint venture (jv) companies Tamesis and AMK are battling it out to win a multimillion-pound contract with Thames Water to... Read More >
- Reservoir project uses floating crane solution Thames Water have used an innovative solution involving a floating crane as part of a project to renovate a reservoir in... Read More >
- Southern Water's Ashford WwTW upgrade passes halfway mark Work on Southern Water's says £12M project to improve Ashford Wastewater Treatment Works has passed the halfway stage. Read More >
- Where there's muck, there’s brass Tim Broadhurst, CCO of CooperOstlund, on utilising sewage and sludge as a renewable energy feedstock and how to maximise... Read More >
- Going green at Severn Trent's Minworth STW With a £60 million investment aimed at producing 30 per cent more green energy from its largest sewage treatment works,... Read More >
- Veolia putting efficiency into effect As part of Anglian Water's Energy Efficiency and Optimisation framework, Veolia is using its global experience to assist... Read More >
- Finding value in liquid waste streams Matt Hale, international sales and marketing director at HRS Heat Exchangers, looks at how value can be extracted from... Read More >
- Innovation Zone: Boosting biogas production Regulatory changes mean that now is a good time for technologies that can help boost biogas production from sludge. Here... Read More >