• Sign Up or Sign In

Simdean Envirotec Ltd

About

Air Pollution Control engineers, Odour Control equipment including wet scrubbers, biofilters, trickling filters. Corrosion resistant material fabrication. Our expertise covers three distinct but complementary areas of activity. 1. Chemical waste elimination 2. Pollution control engineering 3. Specialist fabrication in corrosion-resistant materials Our 10,000 sq ft factory, complete with storage and testing areas, is based in Warwick, England. Our services range from technical advice to design and prototyping, manufacture, installation, inspection and maintenance. We are happy to work on any aspect of a project or provide a complete turnkey service. Both our shop-based and on-site teams have a thorough understanding of all forms of thermoplastic and GRP construction. KEY AREAS OF EXPERTISE Plasma-based chemical and gas waste elimination Gas scrubbers and stripping systems to 200,000 m3/hr for chemical and odour control Extraction and ventilation ducting to HVCA DW/154 and better Chemical dosing and pipework systems in avariety of materials Bund construction, preparation and lining Integrally bunded tanks, both plastic and GRP clad Storage vessels to BS 4994 up to 50 m3 SECTOR EXPERIENCE INCLUDES Oil recycling plant Pharmaceutical production Solvent recovery plant Waste transfer stations Waste oil recover plant

Contact

Mr Nick Carter
20 Brookfield Drive

Holmes Chapel
Cheshire
CW4 7DT
www.simdean.co.uk

Eagle Lane Waste Transfer Hub, West Midlands

Simdean Envirotec have played an important role in helping Sandwell Municipal Borough Council to dramatically improve their waste and recycling services for residents.

Sandwell's £10 million Eagle Lane waste transfer hub in Tipton, West Midlands, occupies an area of more than 23,500 square metres and relies on an advanced Simdean odour control system to ensure that odour emissions into the atmosphere are within the regulatory requirements. From the very outset highly efficient odour control was considered a vital part of the development, which is located in a densely-populated urban area.

The waste transfer hub is one of several initiatives taken by Sandwell as part of a long-term commitment to providing quicker, more efficient services. It has the capacity to handle up to 200,000 tonnes of waste each year. All rubbish from Sandwell's residents - including domestic, garden and food waste as well as recycling - is taken to the hub when collection vehicles are full. Materials are then bulked up and sent to either recycling centre processors or waste treatment facilities. The hub currently deals with 1,700 tonnes of waste and recycling each week.

A total package

With vast odour control experience, Simdean were able to offer a complete package of specialist engineering services. These covered design, manufacture, delivery, installation and commissioning. Through its open, flexible way of working, the company was able to provide access to a highly-integrated, multi-disciplinary technical team that ensured a seamless transition from one aspect of the project to the next.

Technical overview

The waste transfer hub's system odour control system is based on a reverse jet cartridge filter and carbon adsorbers handling a contaminated air flow rate of 120,000m3/h.

Carbon adsorbers

There are two carbon adsorbers, each of annular design and capable of handling 60,000m3/h of exhaust air. The adsorbers utilise granular activated carbon as the adsorption media.

Reverse jet cartridge filter

This is capable of handling 120,000m3/h of exhaust air and was designed for the removal of dust and particulate matter.

The filter requires a compressed air supply for operation of the automated cleaning system.

Exhaust fans

The system incorporates two fans complete with motors and inverters, each capable of handling 60,000m3/h against 3600 Pa at 20oC.

Ductwork and exhaust stack

External and internal ductwork and an exhaust stack were fabricated and installed by Simdean complete with all necessary brackets, fittings and volume control dampers.

Simdean's manufacturing centre in Warwickshire has the facilities to fabricate most types of plastic including uPVC, CPVC, PP, PE, PMMA and Halar in diameters of up to 5 metres. The centre has extensive GRP facilities using vinyl and phenolic resins. Heavy lifting equipment, gas analysis equipment, heat bending up to 3 metres, fusion welding systems and site welding complete the centre's range of services.

Control panel

The waste transfer hub's odour control system is operated via a control panel complete with an HMI touch screen and field wiring.

Quality

Simdean quality systems for pollution control, storage tanks and process vessels meet ISO 9001 requirements. All are manufactured in accordance with appropriate design and construction codes, principally BS 4994, BS EN12573 and BS EN 1380.

Project outcome

The waste transfer hub was a major installation that drew upon all aspects of Simdean's odour control expertise.

All stages of the project were completed on time and to cost. The finished system allows the transfer station to operate at maximum efficiency with odour emissions well within the requirements of the regulatory authorities..


For further information please email Simdean Envirotec Ltd

© Faversham House Group Ltd 2019. WWT and WET News news articles may be copied or forwarded for individual use only. No other reproduction or distribution is permitted without prior written consent.

Cookie Policy   |   Privacy Policy