• Sign Up or Sign In


ERG has for over 30 years been supplying systems and services to combat air pollution and odour problems. We provide turn-key tailor-made solutions optimised to give the best technical solution for the lowest capital and running cost. We have more than 600 systems currently in operation. New industries using ERG's expertise include composting/recycling operations and energy from waste plants. With an unrivalled range of equipment types, it means we are ideally placed to help you comply with both current and foreseeable legislative requirements. Our range includes biofilters, CIF's, bioscrubbers, venturi, packed towers and vortex scrubbers. Our solutions cover both wet and dry scrubbing systems along with the Odorgard catalyst enhanced system. Draw on our expertise not only for odour control systems but soluble contamination capture and recovery as well as hazardous flue gas cleaning systems. In addition, the V-tex vortex scrubbing, stripping and condensing technology gives us an added dimension for particulate removal and VOC contamination abatement. Finally, we have a comprehensive maintenance service to help keep your odour control and industrial air pollution control equipment running efficiently.


Mr Trevor Pratt
Enterprise House,Foundry Lane

West Sussex
RH13 5PX

ERG completes acid fume treatment project in Central Asia

Horsham, UK based ERG (Air Pollution Control) Ltd has completed a £300k project to supply an acid fume scrubber to Kazakhstan.

The client is the petrochemical giant, Tengizchevroil, which is a joint venture between Chrevron, Exxon Mobil, and local Kazakh operators KazMunaiGas and LukArco.

The client needed the scrubber to treat hydrochloric acid (HCl) fumes which are given off from a 50m3 storage tank containing concentrated HCl.

The normal operating temperature range of the fumes is 20oC to 44oC, but Tengizchevroil specified an operating range for the fume scrubber between -40oC and +75oC to allow for extreme Kazakh weather conditions in addition to an operating margin.

To add to the technical challenge, the client also specified that the scrubber should be capable of handling pressures up to 6 atmospheres.

Under normal operation, the concentration of HCl in the extracted fumes is 130,000 ppm, but this can rise to in excess of 500,000 ppm at the extreme operating limits. The ERG designed scrubber reduces the HCl content down to less than 2ppm - an impressive extraction efficiency of more than 99.99%.

The key part of the scrubbing system is a packed tower scrubber. This uses water as a scrubbing liquor to capture the displaced HCl fumes that are expelled as the storage tank is filled.

The scrubber is mounted on a 3.4m3 recirculation tank, and along with a recirculation pump and associated pipe-work, the complete system is supplied on a 304L stainless steel skid. The pump re-circulates the scrub liquor water from the tank to the packed tower. Mains water is supplied to the recirculation tank to make up evaporation losses.

To monitor the build up of HCl in the scrubbing liquor, samples are taken by means of a safe sampling valve that can be linked to a conductivity or pH instrument. The unit also allows ambient air to be drawn into the tank as the HCl is drawn off for use.

The cleaned fumes containing <2ppm HCl pass through a pad type demister before being discharged to atmosphere.

The unit was built in Yorkshire and left the UK in Oct on its 4,000+ mile 6-week overland journey across Europe and Russia to the refinery site at Atyrau on the Caspian Sea.

For further information please email ERG (Air Pollution Control) Ltd

© Faversham House Group Ltd 2020. WWT and WET News news articles may be copied or forwarded for individual use only. No other reproduction or distribution is permitted without prior written consent.

Cookie Policy   |   Privacy Policy