• Sign Up or Sign In

Micronics Limited


Micronics Ltd are specialists in the design manufacture and application of Ultrasonic "Clamp-on" non-invasive - Liquid Flow, Energy (Heatmeters and Cooling), Level and Open Channel Meters. We have Fixed Flowmeters and Portable Instruments suitable for clean and contaminated liquids in closed pipe and open channel applications throughout the process, chemical, food, water and building services industries. Micronics can help you monitor and act on energy and water consumption levels within your organisation by providing measurement for control and monitoring information for improved management. Micronics also offer flow measurement and analysis services, combining the product range with Flow Analysis software and expert staff to conduct flow and pump efficiency surveys. We market our meter products under the PORTAFLOWTM and Ultraflo brand names with Sales, Service and Application Support available in 50 countries around the world.


Mr David Leigh
Knaves Beech Business Centre Davies Way Loudwater

High Wycombe
HP10 9QR

U1000 HM - Fixed clamp-on Heat/Energy metering solution

Clamp-on to a New smarter clamp-on solution to heat/energy metering from Micronics for significant installation savings and simple, accurate measurement from outside the pipe!

Measuring the heat/energy consumption of hot (LTHW) and chilled water services to monitor, control and manage energy consumption is a key area in building services and energy management. But the installation process including system drain down, pipe cutting etc has always been a significant cost and barrier to wider application of sub-metering.

At last a solution has arrived from the longest established manufacturer of clamp-on, ultrasonic meters the U1000 HM heat/energy meter from Micronics. Building on their many years of experience and success in this area, Micronics has now developed a best value clamp-on heat/energy meter to compliment its successful U1000 clamp-on flow meter and facilitate the wider use of clamp-on ultrasonic flow measurement for water sub-metering and heat/energy measurement.

The U1000 HM is a simple out of the box, onto the pipe heat/energy metering solution with no programming or specialist engineering required! All you have to do is clamp the unit to the pipe, select the pipe size, release the sensor clamps, secure the pre-wired, clamp-on PT100 flow and return temperature sensors and connect power to the pre-wired cable provided. Yes it really is that simple because Micronics have listened and simple installation is a key design feature.

Another cost-effective alternative to expensive in-line meter installation from Micronics with no drain down or cutting of pipes required plus dry servicing, providing minimum downtime and maximum availability!

The U1000 HM is a clamp-on, transit time, ultrasonic flow meter plus PT100 temperature sensors designed to provide accurate measurement of liquid flowing within a closed pipe plus the flow and return temperature difference to calculate the heat/energy load, without the need for any mechanical parts to be inserted through the pipe wall or to protrude into the flow system.

It takes just a few minutes to install and there is no need to shut down flow or drain the system! And its Modbus compatible, so it can be used as a standalone meter or an integrated part of your aM&T or BEM's system.

So if you need to meter the heat/energy load of hot (LTHW) or chilled water services as part of your energy management strategy or building services, for retrofit or new build applications, the U1000 HM should be a must consider solution! For further information call: +44 (0)1628 810456 or visit www.micronicsflowmeters.com

For further information please email
Micronics Limited

© Faversham House Group Ltd 2020. WWT and WET News news articles may be copied or forwarded for individual use only. No other reproduction or distribution is permitted without prior written consent.

Cookie Policy   |   Privacy Policy