• Sign Up or Sign In

Pulsar Process Measurement Ltd

About

Pulsar Process Measurement Ltd design, manufacture and market level, volume, open channel flow, pipe flow and pump control instrumentation. Our company specialises in non-intrusive measurement, and our technology is used in a wide variety of industries and applications worldwide. By concentrating on the development of ultrasonic level measurement, we believe that Pulsar can be fairly described as the world technology leader in this field. The product range has been designed to provide a full range of alternatives, from single point of measurement installations right through to complex multi-point applications with digital communications. The ultrasonic range has been augmented with other products, so for the water industry, interface monitors for tricky sludge level measurement application have been added together with units that can be used to warn of pump failure. In more general level applications, single point measurement devices are available where continuous level measurement is inappropriate.

Contact

Mr Alistair MacKinnon
Cardinal Building, Enigma Commercial Centre
Sandy's Road
Malvern
Worcestershire
WR14 1JJ
www.pulsar-pm.com

Pulsar's Sludge Finder 2 - twin channel, versatile interface measurement

Remote measurement with Sludge Finder 2 means you can put an end to tedious, time consuming, potentially unhygienic and hazardous manual measurements using gap switches or vacuum tubes.

Sludge Finder 2 is a major update to Pulsar's successful Sludge Finder, designed to reliably measure interface levels in primary, secondary or tertiary sludge tanks and SBR systems. A twin channel device, Sludge Finder 2 can be assigned to two settlement tanks, or one of the channels can be used with a Pulsar dB transducer for 'through air' applications such as level measurement.

In interface detection mode Sludge Finder 2 operates ultrasonically through liquid, using sophisticated and well proven echo processing algorithms to identify the sludge level. Sludge Finder 2's transducer is immersed in the liquid, emitting a high frequency (680 kHz) ultrasonic pulse down towards the sludge interface. The pulse reflects from the interface of the denser material back to the transducer face. This echo is analysed by the controller unit providing a depth reading and an analogue output proportional to the height of the interface above the vessel bottom.

Sludge Finder 2 is designed to be maintenance free. The Viper transducer is a self-cleaning underwater acoustic sensor that results in continuous, reliable sludge level measurement that reduces the need for sludge pumping, optimises dosing and frees staff for other tasks.

Sludge Finder 2 is simple to install and program, and will operate with one or two transducers: you can mix and match Sludge Transducers and Pulsar's main dB transducer range to give astonishing versatility. Manage two clarifiers/thickeners, or one clarifier plus a level application from a single unit, providing flexible, economical control and a single connection point for system interface.

For further information please email Pulsar Process Measurement Ltd

© Faversham House Group Ltd 2019. WWT and WET News news articles may be copied or forwarded for individual use only. No other reproduction or distribution is permitted without prior written consent.

Cookie Policy   |   Privacy Policy