Process Measurement & Analysis Ltd
We market Water Quality Analytical instrumentation Optically, Ultrasonically or via wet chemistry for monitoring of trace metals, TOC, Phosphate, Colour, DOC, UV254, Coagulation Control, Aluminium, Ammonia, PH, Dissolved Oxygen, turbidity, COD, BOD, organics etc
Mr Chris Bristow
Brook Mills House Carr Lane Slaithwaite
A new approach to ammonia measurement!
In Situ Ammonia Measurement from S::CAN AMMO::LYSER
S::CAN produces a wide variety of high performance, cost effective Sensors & Transmitters for the Water & Waste Water marketplace. Designed to satisfy a broad range of applications. The IP65 Multi-Channel Con::lyte transmitter supports 2, 3 or 4 channels. This is complete with a backlit display & 4-20mA outputs for each channel/determinand.
Intended for sophisticated analysis, the powerful 8-Channel Con::stat is available with standard feature such as touch screen, embedded windows NT, LAN, 4-20mA IO, integral modem for GPRS connection.
The Con::stat supports simultaneous multi-parameter sensor configurations, such as Ammo::lyser & Specto::lyser. A typical set up is ammonia, pH and temperature with TSS, Nitrate & BOD/COD making this a very powerful sewage works or compliance device. In addition O2 and pH could be added. WEB based data analysis is also available and SMS messaging of events!
S::CAN pioneered the worlds first practical online immersed spectrophotometer. The benefit achieved via this entirely new approach was to provide cost effective derivation of many parameters which previously required a sample to be sucked into a 'Process Cabinet Analyser'. Also available from S::CAN is the new LOW COST, LOW MAINTENANCE AMMO::LYSER configured as a dip type Ammonia sensor with advanced potassium compensation complete with temperature and pH compensation.
Each sensor is supplied with a Global calibration allowing plug & play operation right out of the box. Improved calibration accuracy is achieved by the use of the local calibration facility. Advanced, robust control of De-Nitrification processes is achievable using a combination of S::CAN CON::STAT & sensors configured for TSS, Nitrate, O2 and BOD/COD.
Typical UK sewage works installation from hand rail. Minimal manual intervention required. Typical outputs are Ammonia, pH and temperature. Auto-cleaning is optionally available, consisting of jet washing the sensor with compressed air (supplied from a low noise locally mounted compressor). Cleaning frequency/duration is user definable at the transmitter.
Other S::CAN parameters are:
COD, BOD, NITRATE, NITRITE, TOC, UV254,
TSS, NTU, TRANSMISSIVITY, COLOUR, DISSOLVED OXYGEN*, pH*, TEMPERATURE*, FINGER PRINTING (ANA::LARM), BTEX and many others.
Note* : These are not by spectra.
For further information please email Process Measurement & Analysis Ltd