• Sign Up or Sign In

Oil Pollution Environmental Control Ltd

About

Services and Products * Oil/chemical Sorbents * Fabric, Booms etc. * Mop and Mechanical oil skimmers for permanent (industrial oil/water separators,interceptors, settlement ponds and lagoons) installations. * Emergency Spill Response - Inland, Estuarine, shoreline and open sea. New developments include : Tank cleaning and sludge (oil recovery) treatment and wasted energy flare stack control systems

Contact

Mr James IIsley
OPEC House

Martin Street, Birstall, Batley
W.Yorkshire
WF17 9PJ
www.opec.co.uk

Oil Skimmers

Oil Recovery Systems used to mechcanically adsorb and retrieve waste oils in industry. Systems are individually designed for each application. Our Products operate in a very large variety of operations in almost every industry.

The E-Series industrial oil skimmer is a safe, efficient mop skimmer system for surface oil contamination removal:

· ORIGINALLY DEVELOPED TO REPLACE THE 552, 1104 AND 2000 SERIES MACHINES WHICH WERE DEVELOPED IN 1976, THE E-SERIES HAS PROVEN TO BE EXTREMELY SAFE AND EFFICIENT.

· CAPABLE OF RECOVERING UP TO 12 TONNES AN HOUR OF OIL AND FLOATING CHEMICALS.

· UP UNTIL 1999 THERE WERE OVER A 1000 MACHINES OPERATING WORLDWIDE.

· USES OPEC MOP AS STANDARD THROUGHOUT THE E-SERIES RANGE OF PRODUCTS.

· FABRICATED IN STAINLESS STEEL, THE MACHINES ARE VERY DURABLE.

· FROM PERMANENT INSTALLATIONS TO EMERGENCY RESPONSE TRAILER MOUNTED UNITS, THE E-SERIES CAN BE ADAPTED FOR MANY POLLUTION PROBLEMS.

· ANY TYPE OF DRIVE UNIT CAN BE SUPPLIED WITH THIS SYSTEM, SUCH AS AIR, HYDRAULIC, ELECTRIC AND DIESEL POWERED MOTORS.

GENERAL DESCRIPTION

The E-Series is the third generation of mop systems, developed since the late 1970's supplying equipment for industry and emergency spill response. The E-Series is the main thrust of OPEC's drive to battle with pollution control worldwide. Its applications are many and varied, both as permanent installations and emergency spill response.

The E-Series oil recovery systems exploit the developments and overcome the difficulties experienced with other types of systems.

The E-Series mop drive unit is a basic unit, common to the complete range of systems and uses standard components which makes it simple to maintain and repair. It is used to drive 4", 6" or 9" OPEC mops and can be mounted as a single or a double unit, on specially made tanks, which in turn, may incorporate an exclusive OPEC oil/water separator. These have been designed by OPEC to increase the efficiency of the systems and are available in various sizes ST5, ST25, ST40 - as standard. Other sizes can be supplied. Or alternatively, in the case of emergency spill response use, fitted on a 205 litre open-topped drum.

The E-Series systems combine the use of the basic oil mop drive/oil extraction unit, varying lengths and sizes of OPEC mop, and a special design of open yoke floating pulley. Varying sizes of guide rollers are used mainly for permanent installations. The mop flow pattern is determined by the position of the pulleys.

The system can simply deploy the mop vertically into bore holes, manholes, etc., without the use of pulleys, guide rollers or outrigger rollers, although in some cases the vertical deployment can be enhanced with the use of outrigger rollers.

Alternatively the E-Series can be incorporated into mobile units for use around various sites and/or for emergency spill response.


For further information please email Oil Pollution Environmental Control Ltd

© Faversham House Group Ltd 2019. WWT and WET News news articles may be copied or forwarded for individual use only. No other reproduction or distribution is permitted without prior written consent.

Cookie Policy   |   Privacy Policy