• Sign Up or Sign In

Quantitech Ltd

About

Supplier of environmental testing and monitoring instruments including gas detectors, FTIR analysers and monitors for occupational hygiene, health & safety and laboratory analysis. Application areas include MCERTS Stack Emissions, CEMS, Stack Particulate Emissions, VOC Emissions, Ambient Air Pollution, PM10 & PM2.5,Automotive Engine Exhausts,Greenhouse Gas Emissions,Process Monitoring,Gas Purity,Occupational Hygiene,Semiconductor Wafer Fab,Soil & Water Testing, Analyser Calibration,Air & Hydrogen Supply and Heated sample lines. Total VOC's, Speciated VOC's, Combustion gases, Acid Gases, Ammonia, Halogens, Dioxins, Freons & Halons, Workplace Gases & Vapours, Speciated Trace VOC's, Particulate Sampling, Trace Gas Impurities, Oil in Water & Soil, Lower Explosive Limits and Cleanroom contaminants. Quantitech is a subsidiary of Gasmet Technologies, a world leading manufacturer of portable and fixed FTIR analysers. Quantitech's success is built on the quality of its products coupled with outstanding levels of service.

Contact

Mr Dominic Duggan
Unit 3 Old Wolverton Road Old Wolverton

Milton Keynes
Bucks
MK12 5NP
www.quantitech.co.uk

MCERTS award for VOC emissions analyser from Quantitech

Quantitech has announced that the Sick 3006 portable VOC monitor has a new MCERTS certificate, valid to July 2019. The company's Dominic Duggan says: "This is important news for any process that needs to report total hydrocarbon emissions data; MCERTS is essential for monitoring Part A processes, however, as a portable instrument, the 3006 is also ideal for Part B processes and stack testers in a wide range of industries.”

The certificate confirms that the 3006 instrument complies with: MCERTS Performance Standards for Continuous Emission Monitoring Systems, Version 3.4 dated July 2012 EN15267-3:2007, and QAL 1 as defined in EN 14181: 2004.
 
Completely self-contained, with its own air and gas supplies, the 3006 is a heated total hydrocarbon analyser for monitoring combustion and ventilation stacks from 100ppb to 100,000ppm. Employing a patented miniature heated sensor block with a flame ionisation detector (FID) controlled up to 240°C, the 3006 can be used to monitor steam saturated gases.
 
The field tests for which the 3006 is certified were conducted with both fuel gas options – Hydrogen and Hydrogen/Helium mix. However, Hydrogen is by far the more preferable option because it is significantly lower in cost and the 3006 operates at very low flow rates (20cc/min).
 
For further information visit: www.quantitech.co.uk 

© Faversham House Group Ltd 2019. WWT and WET News news articles may be copied or forwarded for individual use only. No other reproduction or distribution is permitted without prior written consent.

Cookie Policy   |   Privacy Policy