• Sign Up or Sign In

Quantitech Ltd

About

Supplier of environmental testing and monitoring instruments including gas detectors, FTIR analysers and monitors for occupational hygiene, health & safety and laboratory analysis. Application areas include MCERTS Stack Emissions, CEMS, Stack Particulate Emissions, VOC Emissions, Ambient Air Pollution, PM10 & PM2.5,Automotive Engine Exhausts,Greenhouse Gas Emissions,Process Monitoring,Gas Purity,Occupational Hygiene,Semiconductor Wafer Fab,Soil & Water Testing, Analyser Calibration,Air & Hydrogen Supply and Heated sample lines. Total VOC's, Speciated VOC's, Combustion gases, Acid Gases, Ammonia, Halogens, Dioxins, Freons & Halons, Workplace Gases & Vapours, Speciated Trace VOC's, Particulate Sampling, Trace Gas Impurities, Oil in Water & Soil, Lower Explosive Limits and Cleanroom contaminants. Quantitech is a subsidiary of Gasmet Technologies, a world leading manufacturer of portable and fixed FTIR analysers. Quantitech's success is built on the quality of its products coupled with outstanding levels of service.

Contact

Mr Dominic Duggan
Unit 3 Old Wolverton Road Old Wolverton

Milton Keynes
Bucks
MK12 5NP
www.quantitech.co.uk

Engine emissions analyser further enhances Intertek’s emissions testing capability

An advanced FTIR analyser installed at Intertek's engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions.

The gas analyser, manufactured by Gasmet (Finland) and installed by UK subsidiary, Quantitech, measures multiple organic and inorganic components simultaneously from a large library of compounds, enabling Intertek’s engineers to quickly and easily change the measured gases; to change the fuel type or cycle conditions, and to see the impact on the emitted gases. The FTIR gas analyser is also portable so that it can be employed in any of the test cells at Intertek, a leading Total Quality Assurance provider.

Intertek’s engine test facility, which accommodates every type of motor vehicle engine covering all fuel types and including both hybrid and battery powered vehicles, provides Intertek's customers with the ability to conduct research on prototype engines and evaluate developments in engine technology. Intertek works with vehicle manufacturers, tier suppliers and high performance driveline development businesses.

The work in the test cells is complemented by Intertek’s ability to conduct on-road emissions testing using its state of the art Portable Emissions Measurement System (PEMS) to measure Real World Driving Emissions (RDE).

Intertek test engineer Cory Graham said: “Vehicle manufacturers are focused on improving both the performance and the emissions of their vehicles, and FTIR provides a greater insight into exhaust emissions so that Intertek can assist manufacturers with their goals of improving air quality and lowering greenhouse gas emissions.”

More recently the FTIR has been deployed in one of Intertek’s most sophisticated cells, which hosts a complete drive line including an engine, a gearbox and also a rig, which creates a complete ‘virtual’ car.

The regulatory tests that are undertaken on vehicles to check their emissions against international standards have recently been under the spotlight, and the latest developments in the European Union will result in a move to vehicle emissions testing whilst the car is being driven (RDE) and this is now provided by Intertek.

Quantitech’s Dominic Duggan says: “Engine emissions testing is an ideal application for Gasmet FTIR technology, because it provides automotive research and development engineers with a broad spectrum of measured compounds, creating a more complete picture of the products of combustion.”

© Faversham House Group Ltd 2019. WWT and WET News news articles may be copied or forwarded for individual use only. No other reproduction or distribution is permitted without prior written consent.

Cookie Policy   |   Privacy Policy